CADopia - To draw a boundary polyline

Advanced experience level

1.       Do one of the following:

·          Choose Insert > Boundary Polyline.

·          On the Draw 2D toolbar, click the Boundary tool ().

·          Type boundary, and then press Enter.

2.       Specify the entities that you want made available for the boundary polyline by doing one of the following:

·          All entities Select All Visible Entities to have all entities in the drawing considered when creating the boundary polyline.

·          Custom selection Define only specific areas to be considered when creating the boundary polyline, which can improve system performance if you are working with a complex drawing. Click Select Boundary Set. In the drawing, select the entities individually or by choosing a selection method from the prompt box, and then press Enter. The Current Selection Set option becomes selected automatically, which indicates that the entities you selected with the Select Boundary Set button will be considered when creating the boundary polyline.

NOTE: You can alternate between All Visible Entities and Current Selection Set without having to select entities again using the Select Boundary Set button. The Current Selection Set option uses the last set of entities you selected with the Select Boundary Set button.

3.       Choose an island-detection option.

4.       Click Select Area.

5.       In the drawing, click inside the area whose closed perimeter forms the boundary, not on the polyline itself. If desired, continue clicking inside additional closed perimeters.

6.       To complete the selection, press Enter.

7.       In the Boundary dialog box, click OK.